Ubiquiti UISP-Fiber-XG 2.5Gbps Uplink 10Gbps Downlink Up To 20Km

UBIQUITI UISP-FIBER-XG UISP FIBER 2.5GBPS UPLINK / 10GBPS DOWNLINK UP TO 20KM Ubiquiti UISP-FIBER-XGS is an optical network unit that can deliver 2.5 Gbps uplink / 10Gbps downlink speeds over distances up to 20 km. (1) XG-PON port (1) 2.5GbE RJ45 LAN port and 24V POE input SPECIFICATIONS Mechanical: 100 x 100 x 27 mm Weight: 220 g Enclosure material: UV-stabilized polycarbonate Hardware: Networking interface: (1) SC/APC, ITU-G.987 XGPON WAN port (1) 100/1,000/2,500 MbE RJ45 LAN ports Management interface: Ethernet in-band PON Memory: 256 MB DDR Onboard flash storage: 32 MB NOR Max. power consumption: 6W Power method: USB-C 5V DC, 3A Power supply: 5V DC, 3A power adapter and 24V DC Passive POE Supported voltage range: 5V DC power adapter Passive PoE 2-pair (4, 5+; 7, 8-) 10–30V DC passive PoE Total non-blocking line rate: Downstream: 9.95 Gbit/s Upstream: 2.44 Gbit/s Normal TX range of optical module: 2 to 7dBm Normal RX range of optical module: -9 to -27dBm Button (1) Factory reset Operating temperature: -15 to 45° C Operating humidity: 10 to 95% non-condensing Certifications: CE, FCC, IC Fiber: Operating wavelength TX: 1,270nm RX: 1,577nm Line code Scrambled NRZ Physical reach 20 km LEDs: Power White: On Ethernet Steady white: Link up Blinking white: Activity OFF: Link down PON status: (3) Signal LEDs All-OFF: Bootup 1x orange: Signal too low (< -27 dbm) 1x white: Signal low (>= -27 dbm) 2x white: Signal good (>= -24 dbm) 3x white: Signal strong (>= -12 dbm) 1x orange + 2x white: Signal too strong (>= -9 dbm) 3x orange: No signal LEDs alternate between orange + white + orange and a signal strength indicator: No authority Note. This device is only compatible with the Ubiquiti UISP Fiber XGS OLT. It cannot be used with third-party OLTs. PACKAGE CONTENT 1 x Ubiquiti Uispfiberxg Uisp Fiber Uplink 10Gbps Downlink Up To 20Km