Ubiquiti Uisp Fiber 10 Gbps Optical Network Unit 20 Km Range

UBIQUITI UISP-FIBER-XGS UISP FIBER 10 GBPS UPLINK/DOWNLINK UP TO 20KM Ubiquiti UISP-FIBER-XGS is an optical network unit that can deliver 10 Gbps uplink/downlink speeds over distances up to 20 km. (1) XGS-PON port (1) 10GbE RJ45 LAN port SPECIFICATIONS Mechanical: 100 x 100 x 27 mm Weight: 220 g Enclosure material: UV-stabilized polycarbonate Hardware: Networking interface: (1) SC/APC, ITU-G.9807 XGSPON WAN port (1) 100/1,000/2,500/5,000/10,000 MbE RJ45 LAN ports Management interface: Ethernet in-band PON Memory: 256 MB DDR Onboard flash storage: 32 MB NOR Max. power consumption: 8W Power method: USB-C 5V DC, 3A Power supply: 5V DC, 3A power adapter Supported voltage range: 5V DC power adapter Total non-blocking line rate: Downstream: 9.95 Gbit/s Upstream: 9.95 Gbit/s Normal TX range of optical module: 4 to 9dBm Normal RX range of optical module: -9 to -26dBm Button: (1) Factory reset Operating temperature: -15 to 45° C Operating humidity: 10 to 95% non-condensing Certifications: CE, FCC, IC Fiber: Operating wavelength TX: 1,270nm RX: 1,577nm Line code Scrambled NRZ Physical reach 20 km LEDs: Power White: On Ethernet Steady white: Link up Blinking white: Activity OFF: Link down PON status: (3) Signal LEDs All-OFF: Bootup 1x orange: Signal too low (< -27 dbm) 1x white: Signal low (>= -27 dbm) 2x white: Signal good (>= -24 dbm) 3x white: Signal strong (>= -12 dbm) 1x orange + 2x white: Signal too strong (>= -9 dbm) 3x orange: No signal LEDs alternate between orange + white + orange and a signal strength indicator: No authority Note. This device is only compatible with the Ubiquiti UISP Fiber XGS OLT. It cannot be used with third-party OLTs. PACKAGE CONTENT 1 x Ubiquiti Uispfiberxgs Uisp Fiber 10 Gbps Uplink Downlink Up To 20Km